Schneider EasyPact TVS contactor 3P(3 NO) – AC-3 – 440 V 6A – 220 V AC coil

[Deskripsi]
Kontaktor yang mencapai 630A untuk pengaplikasian AC3 335kW/ 400V dan 1000A utk AC1. Kontaktor Easypact TVS 3pole dari 6A hingga 630A untuk pengaplikasian motor induktif dan kontaktor 4pole dari 16A hingga 125A untuk pengaplikasian AC1.

[Spesifikasi]
1. product name : EasyPact TVS
2. product or component type : Contactor
3. device short name : LC1E
4. contactor application :
-Motor Control
-Resistive Load
5. utilisation category :
-AC-3
-AC-1
6. poles description : 3P
7. power pole contact composition : 3 NO
8. [Ue] rated operational voltage : Power circuit: <= 690 V AC 50/60 Hz
9. [Ie] rated operational current :
-6 A (at <60 °C) at <= 440 V AC AC-3 for power circuit
-20 A (at <60 °C) at <= 440 V AC AC-1 for power circuit
10. motor power kW :
-1.1 kW at 220…230 V AC 50/60 Hz (AC-3)
-2.2 kW at 380…400 V AC 50/60 Hz (AC-3)
-2.2 kW at 415 V AC 50/60 Hz (AC-3)
-2.2 kW at 440 V AC 50/60 Hz (AC-3)
-3 kW at 500 V AC 50/60 Hz (AC-3)
-3 kW at 660…690 V AC 50/60 Hz (AC-3)
11. Control circuit type : AC at 50/60 Hz
12. [Uc] control circuit voltage : 220 V AC 50/60 Hz
13. height : 74 mm
14. width : 45 mm
15. depth : 80 mm
16. net weight : 0.3 kg
17. colour : Grey (RAL 7011)
18. auxiliary contact composition : 1 NO
19. [Uimp] rated impulse withstand voltage : 6 kV coil not connected to the power circuit conforming to IEC 60947
20. [Ui] rated insulation voltage : 690 V conforming to IEC 60947-4-1
21. overvoltage category : III
22. [Ith] conventional free air thermal current : 200 A at <= 60 °C for power circuit
23. Irms rated making capacity : 60 A at 440 V AC for power circuit conforming to IEC 60947-4-1
24. rated breaking capacity : 48 A at 440 V for power circuit conforming to IEC 60947
25. [Icw] rated short-time withstand current :
-80 A 40 °C – 10 s for power circuit
-45 A 40 °C – 60 s for power circuit
-20 A 40 °C – 600 s for power circuit
26. associated fuse rating :
– 10 A gG at <= 690 V coordination type 1 for control circuit conforming to IEC 60947-5-1
-12 A gG at <= 690 V coordination type 1 for power circuit
27. average impedance : 2.5 mOhm – Ith 20 A 50 Hz for power circuit
28. power dissipation per pole :
-0.09 W AC-3
-1 W AC-1
29. control circuit voltage limits :
-Operational: 0.85…1.1 Uc at 50 Hz (at <55 °C)
-Drop-out: 0.3…0.6 Uc at 50 Hz (at <55 °C) 30. operating time : -12…22 ms on closing -4…19 ms on opening 31. mechanical durability : 10000000 cycles 32. maximum operating rate : 1800 cyc/h 60 °C 33. inrush power in VA : -95 VA 50 Hz cos phi 0.75 (at 20 °C) -95 VA 60 Hz cos phi 0.75 (at 20 °C) 34. hold-in power consumption in VA : -8.5 VA 50 Hz cos phi 0.3 (at 20 °C) -8.5 VA 60 Hz cos phi 0.3 (at 20 °C) 35. heat dissipation : 2…3 W for control circuit 36. minimum switching current : 5 mA for control circuit 37. minimum switching voltage : 17 V for control circuit 38. non-overlap time : -1.5 ms on energisation guaranteed between NC and NO contact -1.5 ms on de-energisation guaranteed between NC and NO contact 39. insulation resistance : > 10 MOhm for control circuit
40. electrical durability :
-1400000 cycles AC-3
-150000 cycles AC-1
41. mounting support :
-Plate
-DIN rail
42. connections – terminals :
-Power circuit: screw clamp terminals 1 1…4 mm² – cable stiffness: flexible with cable end
-Power circuit: screw clamp terminals 2 1…2.5 mm² – cable stiffness: flexible with cable end
-Power circuit: screw clamp terminals 1 1…4 mm² – cable stiffness: solid without cable end
-Power circuit: screw clamp terminals 2 1…4 mm² – cable stiffness: solid without cable end
-Control circuit: screw clamp terminals 1 1…4 mm² – cable stiffness: flexible without cable end
-Control circuit: screw clamp terminals 2 1…4 mm² – cable stiffness: flexible without cable end
-Control circuit: screw clamp terminals 1 1…4 mm² – cable stiffness: flexible with cable end
-Control circuit: screw clamp terminals 2 1…2.5 mm² – cable stiffness: flexible with cable end
-Control circuit: screw clamp terminals 1 1…4 mm² – cable stiffness: solid without cable end
-Control circuit: screw clamp terminals 2 1…4 mm² – cable stiffness: solid without cable end
43. tightening torque :
-Power circuit: 1.2 N.m
-Control circuit: 1.5 N.m